How to build a shade net house

How to build a shade net house

How to Build Shade House for Your Vegetable Garden 

Things to Consider before you Build

During the summer and during the monsoons, our region of the earth becomes extremely windy. Build Shade House And the winds are stronger on the terrace than they are on the ground. We required a sturdy construction to keep the shade house together in such windy conditions. As a result, the only material we could employ to construct our shade house frame was steel. PVC pipes or bamboo constructions would not be able to endure high winds.

There were two alternatives in the steel itself. Whether to employ pipes or angles is a decision that must be made. For two reasons, we stayed with pipes. To begin with, they are simple to manage, and attaching the shade net to a pipe rather than angles is much easier. Second, the aesthetics of a pipe are far superior to those of angles.

We also wanted our structure to double up as a trellis for climbers and creepers. 

Shade House Design

The shade house design and the materials utilized are shown below.

1.5-inch steel pipes were utilized as verticals to keep the structure together, while 1-inch pipes were used for everything else, as indicated in the figure. Trellis construction was made up of flats. From a strength and aesthetics standpoint, flats may have been replaced with a 1-inch pipe. It would only have cost a couple of dollars more. The materials we used to construct the shade house are listed below. 

  • 1.5-inch steel pipe (2mm thickness) – 3 pieces of 20 ft length each
  • 1 inch steel pipe (1 mm thickness) – 14 pieces of 18 ft length each
  • 1 inch flat – 7 pieces of 18 ft each
  • 75% shade net cloth – 400 sq ft
  • UV resistant plastic wire
  • Paint and Primer

How to Build

The outer vertical poles were trimmed to size and installed initially. They were held up by the false pillar posts or the walls. First, a short square rod was drilled into the wall at a 20-30 degree angle to the ground. This angle aids the rod’s insertion into the wall. These rods were then soldered to the 2-inch steel pipes. 

After that, the triangular trusses were measured. Each of the three trusses was made from a 1-inch steel pipe that was measured and labeled. They were soldered to the vertical poles after that.

After that, the inner verticals were built and soldered to the trusses. For further support and to construct a permanent trellis structure, a few flats were soldered to the verticals.

Finally, the horizontal bars (1-inch pipe) were placed down on top of the trusses and soldered in place. These were used to connect the three trusses.

We cleaned the pipes with sandpaper and cloth after the building was complete, and then painted them to protect them. The shade cloth was laid on top of the structure once the paint had dried and was secured using fishing net wire. The UV-protected fishing net wire we used was perfect for this project. As a result, it would not quickly degrade in heat and would last much longer than ordinary plastic wires.

We tied coconut fiber ropes across the shade cloth from one side to the other to add further wind protection. This was important because our location is quite windy. You don’t have to do this if you don’t receive a lot of wind.

Total Cost of Building Shade House  

Steel cost Rs 60/- per kg for the best brand of steel in town when we built the shade house. The price of other lower-quality steel was around Rs 50/- per kg. However, we chose the highest quality steel, and the total cost of the steel pipes, including transportation, was around Rs 8000/-.

We used a 75 percent sunblock shade net, and the total cost for roughly 400 sq ft of shade net was less than Rs 1,000/-. Another Rs 200/- is spent on UV-resistant fishing net wires. The cost of paint and priming for painting the pipes was around Rs 600/-. We completed the painting ourselves, thus the wages for painting aren’t included in this calculation.

Other Advantages of the Shade House 

There are many other reasons Why you Should Build a Shade House now that you know How to Build a Shade House. Though the primary purpose of a shade house is to protect plants from the sun, there are a few other benefits to using one. These are a couple of the functions we’re currently using. You may always use your imagination to come up with new ways to use the structure.Plants’ water requirements decrease, resulting in water conservation. Here are some more water-saving suggestions.

  • Trellis structures that are permanent.
  • Climbers may be made to grow vertically, allowing for more effective space utilization.
  • Hanging pots from the structure is also an option.
  • The shade house also helps to keep the house cool.
  • Plants are protected from heavy rains by the shade net, which absorbs the majority of the force of the raindrops.
  • Monkeys are kept at bay by this shrub. You can do this by using a shade cloth to cover the entire shade house or a fishing net to cover the edges of the shade house.

Comments
No comments found.

Leave a Reply

Your email address will not be published. Required fields are marked *